DAHON STEM Spezifikationen

InstructionsService

CAUTION:Do not attempt to ride your bicycle with a loose handlepost hinge. If when you close the handlepost hinge and then close the hinge latch, it a

WARNING: If the hinge is too tight this can cause damage to the hinge.WARNING: If the hinge is too tight this can cause damage to the hinge.WARNING: I

WARNING:Failure to correctly tighten the headset can lead to damage to the bicycle or injury to the rider. WARNING: If you are unsure of how to make

NOTE: If you find your handlepost quick release becoming too stiff, clear dirt and add a small amount of lubrication between the quick release and the

NOTE: While adjusting a loose hinge, slowly turn in 1/16 increments. Failure to effectively adjust the hinge could result in the hinge being too tight

WARNING: If the hinge is too tight, it could cause tension and damage to the frame. NOTE: While adjusting a V-Clamp hinge, turn in increments of 1/16

WARNING: If the hinge is too tight, it could cause tension and damage to the frame. NOTE: While adjusting a V-Clamp hinge, turn in increments of 1/16

VERSION C*WARNING: If the hinge is too tight, it could cause tension and damage to the frame. NOTE: While adjusting a V-Clamp hinge, turn in increment

WARNING:The LockJaw hinge can ONLY be opened with the OC bolt.WARNING:As a general rule, the pivot bolt will not need any adjustment. Do NOT try to op

Open/Close the LockJaw HingeUse a 6 mm Allen key.Please refer to the folding instructions that were included with your bicycle on how to properly fold

Contents02Dealer Pre-delivery Checklist ...03VRO Stem ...

Adjust the Tightness of the LockJaw (The Adjustment Bolt)Version ANOTE: Only turn the adjustment bolt in small increments (e.g. an 1/8 turn) each time

NOTE: Only turn the adjustment bolt in small increments (e.g. an 1/8 turn) each time, otherwise it could result in too much constriction and/or moveme

NOTE: Only turn the adjustment bolt in small increments (e.g. an 1/8 turn) each time, otherwise it could result in too much constriction and/or moveme

The Kore I-beam is a ground-breaking new saddle system. As well as dramatically cutting down weight, the system allows the rider to achieve maximum s

NOTE: If you find your seatpost quick release becoming too stiff, clear dirt and add a small amount of lubrication between the quick release and the s

WARNING: If you are unsure of how to make proper adjustments to your bicycle, seek a qualified bicycle technician for professional advice on adjustmen

High AdjustmentWhen looking from the rear, turn the top adjustment screw to align the guide pulley with and below the outer line of the smallest sproc

For the best possible outcome, tighten the cable adjustment bolt (clockwise) until you hear a noise that occurs without harming the shifter being oper

www.dahonbikes.com2012 Dahon North America Service InstructionsDahon EuropeNo.1 P.O. Box 17,Goliamokonarsko Shosse Str.Tsaratsovo Village, 4027, Bulg

WARNING: All Dahon bikes use only original Dahon component specifications. The company will not be liable for any damages caused by non-original Dahon

FrameItem Description RemarksOKThe frame is not damaged or defective.All frame joints do not have physical defect or damage.Main hinge(s) opens and cl

Handlebar and handlepost Handlepost, stem,handlebar HeadsetHandlepost hingeFree of physical defect or damage.All bolts are fastened and correctly tigh

Dealer Pre-delivery ChecklistWheel quick releaseWheel bearingsCorrectly installed and adjusted.Correctly installed and adjusted.Item Description Remar

WARNING: Check to see if the clamps are facing the outside; properly aligned to the stem mount T-bar. VRO StemWith a VRO clamp, the handlebar can b

08Flat Pak StemStep 2 - To adjust the height and position of the Flat Pak stem, close lock lever tightly by pushing forward. Lock lever tension can be

Flat Pak Stem ContinuedHigh City positionLevelTrekking position Low Road position Step 3 - Lift front lock lever and rotate handlebars to desired posi